The clatter of a supercharger increases with smaller pulleys and manage belts.
The jotter flush of a performance engine is an inseparable allotment of the fiery rod culture. In the situation of supercharger performance, louder is exceeding. Replacing your supercharger's pulley and ride cestuses may be the upgrade you require to not one finish the added performance to your vehicle, however to further training an audible differentiation that Each on all sides of you can hear.
Install the new supercharger pulley onto the supercharger. Tighten the center bolt on the pulley. Avoid putting excess weight on the pulley, which may warp its spinning capability.5.
2. Remove the supercharger drive belt by unwrapping the girdle from the supercharger pulley, tension pulley and crank pulley.
3. Remove the supercharger pulley by carefully loosening the center bolt of the pulley. Slide the pulley off of the supercharger.
4.
Instructions
1. Loosen the supercharger operate sash tension pulley located on the engine block.Wrap the new supercharger drive belt around the installed supercharger pulley, tension pulley and crank pulley of the motor.
6. Adjust the tension of the supercharger drive belt by tightening the tension pulley on the engine block. A properly tightened supercharger drive belt has no more than 1/4 inch of "play."
