Remove the filler cap from the oil cistern.2. Distance the appropriate basin directly below the drain plug on the oil container.3.
An far-reaching department of maintaining your motorcycle is to Often alternate the oil. Filled this action every 3,000 miles and prize more advantageous security during your rides and prolong the dash of your engine.
Instructions
1.Influence a siphon between the oil container and the grab basin. Some newer Harley models may hold their own extract hose that you can exercise.
4. Custom a socket wrench to remove the withdraw plug from the backside of the oil vat, while continuing to control the siphon in community.
5. Wait until all oil has drained into the basin, then screw the drain plug back into the oil vehicle.
6. Remove the seat of your motorcycle. Most Harley-Davidsons' oil filters are located in a cylinder under the seat.
7. Obtain the lid off the cylinder's housing and remove the cylinder.
8. Unlatch the clip that secures the cap on the cylinder using needle-nose pliers and lift out the used oil filter.
9. Replace the old filter with a new filter before locking the cap back onto the cylinder. Put the cylinder back into its home and replace the lid.
10. Bolt the seat securely back onto the Harley.
11. Pour the new oil into your oil tank. Your service manual should designate the proper amount for your specific motorcycle model.
12. Put the filler cap back onto the oil tank. Fasten it firmly to avoid a spray of oil.
