A Hyundai Sonata's Eccentric person sensor might necessitate to replaced provided the machine begins to stall or misfire. The crank sensor is a inconsequential sensor that tells the Sonata's Glimmer plugs when to element. The sensor is attached to the backside of the vehicle's engine. It includes three wires connected to the back that should be clear before removing them in form to detain track of where they reattach to the dewy sensor.
It Testament and be the solitary plug-looking Slogan, with three wires running from it.3. Remove the mounting bolt that holds the sensor in abode. This bolt can be removed with an open-end wrench.
2. Slide under and place the the Eccentric person sensor. It is attached to the backside side of the engine on the Chauffeur's side on your Sonata.
Instructions
1. Jack up the Chauffeur's side of the Sonata and slide the jack stands under the frame. Place the vehivle down on the stands, with the stands resting directly underneath the frame.4. Point the three wires with paper showing which wires connect to which terminal. One terminal Testament be concrete (+), one is a ground wire and the other is the sensor's menu wire, which runs back to the Sonata's power control module. The wires' colors will vary between different years of Sonatas. Remove the wires from their respective terminals with a Philips screwdriver.
5. Reconnect the wires to their respective terminals on the new sensor.
6. Hold up the new sensor and thread the mounting bolt back in place by hand. Tighten it with a wrench.
7. Lower the Sonata down from the jack stands and jack.
