Lexan is a capable, dependable alternative to glass.
Lexan is a configuration of Plexiglas that is ofttimes used for windows in corner of glass. You may thirst for to tint Lexan with tint films, on the other hand Lexan produces Gauze when it is heated so adhering tint movie is practically impossible to effect without air bubbles forming. Spraying tint allows you to contain the complete surface evenly while all the more allowing Gauze to escape from the surface without disturbing the tinted Stop.
Instructions
3. Paint the Lexan with tint spray. Apply an even coat by holding the can Ten to Twelve inches from the surface of the Lexan. Avoid holding the can in one spot for an extended period of time as this can cause puddling. Allow the spray to dry for two to three hours and apply a second coat if necessary to accomplish a darker tint.4.
1. Disinfected Lexan with degreaser. Practice an much coat and wipe away dirt and debris with a paper towel. Wash clean with water.2. Frame Lexan with painter's tape. Cover any surrounding surfaces with newspaper to protect them from any tint spray.
Remove the painter's tape and newspaper from surrounding areas.
