Repairing and changing a side-view mirror is a clean project that can be done in under an age. The type of repair Testament depend entirely on the type of mirror you accept on your automobile. If electronic or handbook both can be repaired or replaced easily.
Instructions
Fix a Side-View Mirror
1. Ahead, you must figure gone what is error with your mirror. A jotter mirror with broken glass is elementary to place. You can acquisition a lot of replacement glass at an auto-parts store. Once you keep the glass, transmit and pry off any debilitated glass. Wear ponderous gloves to produce undeniable you conclude not shorten yourself. Once you posses the glass removed, select the virgin glass, peel the back and stick it into area. The assignment is done in ethical a infrequent minutes.
Electric mirrors, which most cutting edge cars chalk up, Testament imaginable crave an abundant modern meeting. A late meeting is available at most parts stores, dealerships or junk yards, depending on the vehivle.
2. Once you get bought a contemporary meeting, you will need to remove the old assembly. Open the door and inspect the side where the mirror is. There is likely an access panel.5. Before you put the access panel back on, test the mirror to make sure it works. Once you know the electronic controls are working you can pop the access panel back on and secure it into place either by pushing on it (if it is a pop-off version) or replacing the screws (if it is a screwed-on version). You are officially set.
If there are no screws, the piece will likely just pop off. Wedge your flathead screwdriver under the panel and pull toward you to pop it off.
3. Once the access panel is off, you will likely see a wiring harness. You can unclip the wiring harness. (Note: Do not cut any wires.) Once you have the harness apart, you will see a few bolts holding the mirror in place. Unscrew the bolts and place them into a safe container. While taking the bolts off, keep your hand on the mirror.
4. Carefully pull the mirror away from the car and set it aside. Take the new mirror and thread the wire through the hole. It helps To possess a friend on hand holding the mirror as you do this. Once you have this done, connect the new wiring to the other side of the harness. Take the bolts you removed and put them back in place. The mirror is officially installed.
It will be shaped like a small triangular piece of plastic. Once you locate the access panel, look for screws. If there are screws, use your screwdriver to unscrew the panel and then remove it.
