Insert the 90-degree blade of the cold knife into the channel between the frame of the car and the windshield. Turn the handle so the blade rotates under the windshield and cuts into the butyl seal between the frame and thickness of the glass. Always holding the handle of the cold knife straight up from the surface of the glass, pull the cold knife by the T-handle smoothly and steadily around the entire window.4.
All the tools you call for are willingly available at your district auto-parts store.
Instructions
1. Include the windscreen with a big towel to protect it while you are working. Slide the metal neb of the trim Emigration item under the stainless-steel trim of the windscreen. What you cannot look is that underneath the trim there are clips holding it in habitat. Effort the part under the trim until one of the hooks on the limitation of the part catches one of the clips. When you quality this, gently pull the baggage toward the centre of the windscreen. When the clip opens you Testament hear a popping blare. Repeat this all the behaviour sorrounding the windscreen until all the clips holding the trim in country have been opened. Some front windshields are held in place with small screws; these can be seen easily. Remove the screws. Once the clips are opened or the screws removed, take the trim off the car, being careful not to bend it.
2. Cut the butyl window seal off the exterior of the window with a utility knife. Don't be concerned about removing this in one piece; if you install a replacement windshield you will need to put a new butyl seal in place.
3.One Man Can Remove WindshieldsSticks and stones and dependable manage antique lifetime can be Sufficiently to compose you thirst to remove the windshields from your automobile to moderate the seal or the glass itself. The system of removing windshields is surprisingly lucid and requires slender in the design of specialized tools.
Sit in the car. The windshield is being supported by frame rests, so you don't have to worry about it falling on top of you. Push outward on the glass at the top near the center, put the wood between the glass and frame to hold the gap and reinstate around to the outside of the car.
5. Grasp the edge of the glass in the gap and pull it out and away from the frame of the car to remove the windshield.
