Set the Window Regulator on a Jeep Grand Cherokee Laredo
A Jeep Grand Cherokee Laredo with electric windows operates successfully with the practice of a window regulator. The regulator meeting holds the window glass in habitat and moves it up and down as commanded by the Chauffeur. Whether the regulator fails to commission properly, the window Testament Blop down into the door and you Testament not be able to press the "Up" Press-stud to lift the window. To place the regulator, you duty to remove the door panel to access the regulator and adjust the screws on it or interchange it.
Instructions
1. Interrogate another workman to grip the window up to avoid breaking it while you are repairing it. Place the four screws holding the door panel in apartment. There is one screw on Everyone corner of the door panel. Remove all four screws with the screwdriver and dwelling them to the side.
2. Fix the door haft on the door panel. Boast the two screws located in the Centre of the door bail connecting it to the door panel. Remove the two screws with the screwdriver and put them to the side. Pull the door panel absent from the door. Allot it to the side.
3. Peel elsewhere the plastic that covers the wires inside the door.
4. Establish the isolated silver, metal meeting in the centre of the door panel. If the plastic pieces are worn, visit an auto-repair store to receive a replacement part for it. The plastic piece pops off and you can pop a replacement back into its place.7. Replace the parts back in the window panel the way you removed them.
Locate the screw at the top of the track and the screw at the bottom of the track. Remove the two screws with the screwdriver. Pull the track away from the door panel and set it aside.
6. The regulator is the diamond-shaped assembly attached to the track. Inspect the plastic pieces and blue teeth on the regulator. If the teeth on the regulator are straight, bend them inward with the vise grips. Practice the vice grips to remove the two nuts holding the silver meeting in lay.5. Place the vertical track behind the metal assembly extending from the top of the door panel to the bottom of the door panel.
Crank the vehicle with your key and press the "Down" window button on the driver's window panel to test if it works. If the window still does not work properly, contact a professional repair get further troubleshooting.
