The Chrysler Town & Territory uses a solid headliner board covered in foam-backed information.
Removing the headliner may be vital for a amount of tasks. There are electrical components, motors, and wiring that amble ultimate the headliner. Installing accessories such as roof-mounted Baggage racks Testament too want the headliner to be dropped. On the Chrysler Town & State, once a infrequent matters gain been removed, the headliner can be popped outside and easily removed fini the rear of the car.
Instructions
1. Encompass a trim Emigration belongings remain the upper plastic moulding surrounding the headliner. When finished, reverse these steps to reinstall the headliner. It will simply snap back into the clips, and the trim will snap into its corresponding grooves.
It comes off in the same manner as the other trim. Using a screwdriver, remove all of the grab handles and garment hooks from the headliner.
3. Slide the trim removal tool behind the dome light and twist it to pop it off. Unplug the wiring and set the light aside.
4. Pull the headliner down gently, starting from the back of the vehicle. It's still held on by several metal clips, but will pop out when light pressure is applied. Work slowly and do not forcefully tear the headliner from the clips.
5. Open the back of the van and slide the headliner out the rear. Slide the object along the length of the trim, giving it a lambent twist whenever you felicitous a clip to dislodge it. Chore your plan completely enclosing the vehivle until all of the trim covering the headliner has been removed.2. Remove the trim surrounding the sunroof, if equipped.
