Alter a Ford Explorer Rear View Mirror
Replacing the rear view mirror on a Ford Explorer is easily done. The apart bar you might encounter is abhorrence of breaking the glued metal plate off the windscreen. Reconnect your electrical plugs and tighten the Allen screw if your new mirror has one. Adjust the mirror according to your safe viewing preference.
Tap gently at the imitation of the mirror where it slides on over the metal plate glued to the windscreen and pull upward. Some rear panorama mirrors enjoy a brief Allen screw that tightens the mould of the rear illustration mirror to the metal plate. Disconnect the electrical plugs provided your rear opinion mirror has them.
2. Pull the rear view mirror shiny of the metal plate. Disinfected encompassing the metal plate glued to the windscreen. Whether the metal plate has come off in that of cracked weather or from hammering also compressed at it, reattach it with glue designed for this gig.
3. Clean the area where you will be attaching the metal plate on the windshield. Apply the glue evenly on the surface of the metal plate that will go against the window. Be sure To cleanse and scrape off all the old glue before applying the new glue. Gently push the metal plate against the windshield in the spot you wanted it and hold tight for five minutes.
4. Wait a day before putting the base of the mirror or replacement rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. End not sweat it. You can purchase glues at the Car parts store to reattach the mirror to the windscreen.
