Monday, March 2, 2015

Install The Leading Struts Inside A 2001 Dodge Caravan

The struts on the front heel of your Dodge Van control the vehicle steady and absorb the shocks of the way. Provided you are installing fresh struts onto your vehivle, you must remove the antiquated struts inaugural. You might besides honest occasion to remove the now struts for inspection and replacing definite parts close the coil spring. In either action, installing a comprehensive strut assembly is a challenging activity that Testament have need at least two citizens.


Instructions


Removing Struts


1. Up thrust the front limitation of the automobile and secure it on jack stands, then remove the trundle for the struts vitality replaced. Whether you are removing both struts and Testament be re-installing the equivalent ones, objective the left and go strut with chalk or washable stain.


2. Disconnect and remove the brackets connecting the brake hose and the hurry sensor cable to the strut bracket. Disconnect the stabilizer bar from the strut meeting with a Torx wrench and Fourty IP bit; advantage a illumination kernel wrench on the link stud to keep it in place while turning.


3. Install the brackets connecting the brake hose and speed sensor cable to the strut assembly brackets.7. Reconnect the wheels and lower the vehicle.


Installing New Struts


4. Raise and push the strut assembly into its strut tower and make sure its upper studs poke through the holes at the top of the tower. Have an assistant hold the strut in place and install the nuts on the studs, tightening them to Twenty one foot pounds.


5. Align the steering knuckle with the strut assembly, placing the knuckle's arm into the strut assembly bracket. Align the mounting holes for both the assembly bracket and steering knuckle and install the bolts, tightening them to Sixty five foot pounds and then an additional Ninety degrees.


6. Install the stabilizer bar onto the strut assembly's bracket. Tighten the nut connecting the two to Sixty five foot pounds. Remove the bolts connecting the strut assembly to the steering knuckle. Remove the nuts connecting the strut assembly's upper mount to the strut tower; these nuts are accessible from underneath the hood. Lower and remove the strut assembly from its tower; this might take an assistant's help due to the weight.