The Pontiac Grand Am fuel pump is electric so you should research its fuses and relays before looking at the fuel pump itself. Provided your fuel receptacle is not empty on the other hand your engine is even having anxiety getting fuel, you may charge To cleanse or interchange your fuel pump The Pontiac Grand Am's discrepancy of styles may fix upon the replacement fuel pump you choose.
Instructions
1. Choose a dissimilar fuel pump for your Pontiac Grand Am. This Testament wish you to cognize the practise and representation, engine immensity and engine type. Models prepared from One thousand nine hundred seventy three to One thousand nine hundred seventy five may retain a 6.5 L or 7.4 L engine. The later day of the Pontiac Grand Am was made from One thousand nine hundred eighty five to One thousand nine hundred ninety one and was equipped with 2.3 L, 2.4 L, 2.5 L and 3.0 L engines.
2. Stare at deeper virgin versions of the Grand Am. Models fictional from One thousand nine hundred ninety two to One thousand nine hundred ninety eight may get a 2.3 L, 2.4 L, 3.1 L or 3.3 L engine. You will now be able to remove the fuel sender and fuel strainer.5. Disconnect the connector retainer for the fuel pump wiring harness. Release the three tabs on the fuel sender beginning with the tab opposite the fuel level sensor and move clockwise.
Benefit the fuel manner impulse and void the fuel vat.
4. Proceeds the snap ring by holding the fuel sender assembly down, or remove the cam lock ring with tool J39765, depending on the model. The contemporary age of the Pontiac Grand Am was specious from One thousand nine hundred ninety nine to Two thousand five and may get a 2.2 L, 2.4 L or 3.4 L engine.3. Prepare your vehicle for fuel pump service.
6. Lift the cover assembly to disconnect the fuel pump electrical connection and rotate the fuel pump baffle counterclockwise to remove it. Slide the fuel pump outlet out of the slot by sliding it out of the slot and discard the seal.
7. Install the new fuel pump using the items included in the kit, especially the new seal. Complete the installation by reversing the removal procedure.
