It's exigent to enjoy the radiator in your Saturn Ion in beneficial shape, as a damaged radiator can explanation overheating and axe the engine. Whether you've got some mechanical skills, you can save some process by replacing the radiator yourself. Although the advance is basically the duplicate for all mannequin agedness, here's exchange the radiator in the usual Two thousand three Saturn Ion.
Instructions
1. Remove the battery from the Saturn Ion. Place the plug on the underside of the radiator and extract the engine coolant into a resealable container. Loosen the bolts that clench the authority steering reservoir to the fan shroud and tilt the reservoir In relation to the rear of the vehicle.
2. Disconnect the electrical connectors on the cooling fan and slide the connectors from the retainer. Remove the fan electrical harness from the fan shroud's tabs.
3. Receive off the cooler line on the upper transaxle on the radiator confine cistern and unsnap the cistern retainer on the front purpose. Cap the cooler limit securely to prevent contamination or loss of fluid.
Derivation the motor and let it run until it's warmed up, check the fluid lines and add more, if needed.
Detach the wiring harness and remove the hose clamp on the lower radiator. unhook the hose and the lower transaxle cooler contour from the radiator and cap the extreme of the path to prevent contamination.
6. Unhook the wiring harness clips on the radiator upper mounting bracket, remove the bracket, rubber mounts, and the radiator coolant air hose clamp. Disconnect the hose and the bolts that clasp the condenser block to the radiator container. Remove the condenser meeting from the radiator and lift the radiator from the vehicle.
7. Install the virgin radiator, and reinstall and reconnect all engine components in the reverse codification they were removed, securing all nuts, bolts and clips securely. Fill the radiator with a alloy of half engine coolant and half distilled soak.4. Remove the clamps securing the upper radiator hose, and detach the hose. Unfasten the bolts holding the fan shroud, and cut off the fan shroud.5.
