The calipers coin the vigour needed to speck the Spectra.
The Spectra is Kia's subcompact vehicle that prepared its debut in 2000. The Two thousand two Kia Spectra is fitted with a 1.8-liter, four-cylinder engine that produces One hundred twenty six horsepower and One hundred eight foot-pounds of torque. The Spectra is again fitted with ventilated CD brakes on the front. Over date, the front brake pads wear outside and have need replacement. The habitual lifespan of front brake pads is 25,000 to 35,000 miles, depending on your driving style. Replacing the front brakes on your 2002 Spectra is not a hard project that you can all-inclusive in an afternoon.
Instructions
Elevate the Spectra's front wheels using a floor jack. Be positive that you levy the jack on a sturdy articulation of the motorcar, such as the sub-frame. Position jack stands under the Spectra and lower the motorcar onto the stands. Stop removing the lug nuts and remove the wheels from the vehicle. Situate this fluid in a Disinfected container.
2. Loosen the front lug nuts with a ratchet and socket.1. Administer the hood of the Kia Spectra and set the adept cylinder reservoir; it is a petty, plastic container on the Chauffeur's side of the firewall. Remove the lid from the reservoir and compose away half of the brake fluid using a turkey baster.
3. Remove the two bolts from the rear of the caliper, using a ratchet and socket. Pull the caliper upward and off of the brake process. Hang the caliper from the upper authority arm using the bungee strap.
4. Grasp the brake pads and remove them from the grooves in the caliper bracket. Accept sign of how the brake pads are positioned before you remove them, as the just out pads must be installed in the twin position.
5. Accommodation the current brake pads into the groves in the caliper bracket, moulding definite they are oriented correctly as the out of date pads were prior to Emigration.
6. Deposit the C-clamp over the brake caliper with the constant collection on the rear of the caliper protest and the screw side lined up with the caliper piston (the caliper piston is the hollow, cylindrical oppose inside the caliper). Abode the senescent brake pad between the C-clamp and the caliper piston to prevent damage to the piston when clamping. Tighten the C-clamp until the brake pad stops Stirring. Loosen and remove the C-clamp and brake pad.
7. Accommodation the caliper back on the brake caliper bracket and tighten the caliper bolts to 19-21 foot-pounds, using a torque wrench and socket.
8. Repeat Steps Three terminated Eight to pocket money the brake pads on the contradictory side of the Spectra.
9. Reinstall the Spectra's front wheels and hand-tighten the lug nuts.
10. Elevate the Spectra off of the jack stands with the floor jack. Remove the jack stands and then lower the vehivle to the ground. Remove the floor jack.
11. Tighten the Spectra's lug nuts, working in a star design, to Eighty five foot-pounds using a torque wrench and a socket.
12. Press and Proceeds the brake pedal repeatedly until it feels persuaded.
13. Check the level of the brake fluid in the master cylinder reservoir. It must be between the "Min" and "Max" lines on the reservoir. Add fluid from the small container until it reaches the correct level. Close the hood.
