Many Motor lorry drivers approximating to exertion on their own vehicles. On the contrary, changing a brake caliper on any vehicle, including a Dodge Ram, should not be done lightly. Provided you don't longing To possess a learned labour on your Dodge Ram, consult with one before any chief preservation.
Instructions
Remove the Old Caliper
1. Hoist and column the Motor lorry on one point of a jack stand, Remove the rotate for the caliper you are replacing.
2. Remove the caliper mounting bolts, using a 3/8 inch hex or socket wrench. Loosen the bolt securing the brake hose becoming bolt in the caliper.
3. Extract the caliper from the rotor toward the rear and gone of its mount. Remove the hose becoming bolt completely, then remove the caliper with the pads all the more installed.
4. Plug the brake hose with a parcel of plastic to prevent losing or contaminating the brake fluid.
5. Remove the brake pads from the geriatric caliper whether they are yet first-class.
Reattach the wheel and lower the truck.11. Pump the brakes multiple times to seat the pads.
Silicone grease works blessing.
7. Attach the brake pads to the inexperienced caliper. Using new pads is best.
8. Install the caliper over the rotor. Seat it in the old caliper's original position until flush. Install the mounting bolts and tighten them to the appropriate torque for your model. (Consult your mechanic for the right torque.)
9. Connect the brake hose to the caliper, using new washers.
10.
Install the New Caliper
6. Lubricate the mounting bolts, bushings, collars and bores.Then, road test them.
