1. 2
3. Coterminous
Unmarried Sheet
Convert a 1998 Dodge Neon Starter
The starter in the One thousand nine hundred ninety eight Dodge Neon is bolted onto the transmission housing in a purpose that's not directly accessible. Getting to the starter without removing engine mounts requires access from above and below the engine. Lift the hood and prop it ajar. Disconnect the abrogating and absolute cables from the battery with an adjustable wrench.2.
This makes replacing the starter for the Dodge Neon slightly aggrandized labour intensive and slightly also onerous than doing the activity on the guideline compact vehicle. Nevertheless much with a sporadic additional steps, you should be able to interchange the starter in your Dodge Neon with relative cooperate.
Instructions
1.Remove the bolt that secures the battery to the battery tray. Lift the battery outside of the engine bay and dwelling it off to the side.
3. Remove the bolts that secure the battery tray to the fender hearty with a socket and ratchet. Lift the battery tray elsewhere of the engine bay and distance it off to the side.
4. Place the starter complete the gap where the battery tray was. Utilize the replacement starter as a visual reference. Establish the top bolt that secures the starter to the transmission housing with a socket. Accessing the upper bolt in this fashion precludes the extremity to remove the front Engine mount.
5. Stand the front of the Neon and distance it on jack stands. Remainder of the Emigration requires you to be under the vehicle.
6. Establish and remove the lower mounting bolt for the starter. Pull the gear on the boundary of the starter gone of the transmission housing.
7. Remove the bolt that secures the generator output wire and the decided battery wire to the back of the solenoid, which bolts onto the starter.
8. Disconnect the push-on wiring harness from the starter solenoid.
9. Push the wiring harness onto the au courant starter solenoid and bolt the generator output wire and the undeniable battery wire back onto the solenoid.
10. Slide the gear on the extreme of the starter back into the transmission housing and secure it in place with the lower bolt.
11. Secure the top half of the starter to the transmission housing by reinserting the bolt through the hole created when you removed the battery tray.
12. Place the battery tray back into the engine bay and bolt it into place.
13. Place the battery onto the battery tray and secure it with the battery lock-down bolt.
14. Reconnect the positive and negative battery cables.
